MAKGIL VIỆT NAM tự hào là nhà phân phối ủy quyền các sản phẩm của hãng ATX/France tại Việt Nam về thiết bị điện, phu kiện và đèn chống cháy nổ, trong đó có Đèn LED (Explosion Proof LED Nonmetallic LED Luminaires).
Dưới đây thể hiện các thông số kỹ thuật & thông tin cần thiết của Đèn LED chống cháy nổ FELED series hãng ATX/France, giúp khách hàng hiểu và lựa chọn được sản phẩm phù hợp với điều kiện làm việc của mình hơn.
NONMETALLIC LED LUMINAIRES FELED SERIES
Explosion Proof LED Nonmetallic LED Luminaires FELED series
APPLICATION OF NONMETALLIC LED LUMINAIRES FELED SERIES
- For use in locations where:
— Hazardous areas are designated as Zone 1 and 2 – 21 and 22
— A high degree of corrosion resistance is required
— Protection against dirt, water and moisture is necessary
- Typical applications include:
— Oil refineries
— Petrochemical facilities
— Food processing plants
— Waste and water treatment plants
— Underground tunnels
— General manufacturing facilities
FEAURE OF NONMETALLIC LED LUMINAIRES FELED SERIES
- Available in 5000K or 4000K Color Temperatures.
- Meets photobiological requirement for Risk Group 0 (RG0).
- Easy to retrofit in same mounting footprint as Appleton’s FE series nonmetallic fluorescent luminaires.
- Full range of lumen outputs, with light distribution equivalent to Appleton’s FE series fluorescent luminaires.
- Corrosion-resistant fiberglass reinforced polyester body and hinged polycarbonate lens.
- High impact resistance housing (20 Joules – IK10) from -30 °C to +55 °C (-22 °F to +131 °F) ambient temperature and wind profile for use in extreme offshore and onshore environments.
- 60,000+ hour LED life for years of maintenance free operation.
- Lightweight design, hinged cover with captive screws, and terminal block wiring for easy installation and maintenance.
- Contemporary, low profile design suitable for tight spaces.
- Standard screw-type terminal block can accept 1.5 to 6 mm2 wire.
- Field replaceable LED driver.
- Industry-leading thermal management for safe, reliable operation over wide temperature range.
- Universal, high efficiency, drivers cover voltage requirements for 120-277 Vac, 170‑300 Vdc, 50/60 Hz +/- 10%.
- High power factor electronic driver (>0.95).
- Standard 6KV surge suppression.
- M20 plug or M25 plug provided.
- Latch assembly and elastomer gasket seals against water and dust ingress, IP66.
- Easily accessed for maintenance using Allen key or straight blade screwdriver.
- Central opening with unique patented release system to prevent damage.
- Can be horizontally or vertically mounted.
- Available in 3 hour emergency version, including built-in monthly self-test. Test results through multi-colored LED.
- Positive safety switch disconnects power to LED’s and driver to allow maintenance in hazardous locations (emergency version).
- Ex e battery with plug-in connector.
STANDARD MATERIAL
- Housing: fiberglass reinforced polyester
- Lens: polycarbonate
- Diffuser: polycarbonate
- Gasket: elastomer
- Internal reflector: highly reflective white polycarbonate (standard versions) or powder coated aluminum (emergency versions)
- Mounting accessories available in different materials such as gray painted aluminum, zinc plated steel, galvanized steel or 316 stainless steel
OPTIONS
- 3 Hours Emergency/Battery Back-Up available ;
— Add suffix -E to the end of the catalog number.
Example: FELED5CBUSADE
FELED3CBUSADE
ATEX/IECEx CERTIFICATIONS & COMPLIANCES
- Certification Type: FELED30
— Gas: Zones 1 and 2
– Conforming to ATEX 2014/34/EU: II 2 G
– Type of Protection: Ex eb mb op is IIC Gb
– Temperature Class: T4
— Dust: Zones 21 and 22
– Conforming to ATEX 2014/34/EU: II 2 D
– Type of Protection: Ex op is tb IIIC Db
– Surface Temperature: +60 °C to +75 °C (+140 °F to +167 °F)
- Ambient Temperature: -30 °C up to +55 °C (-22 °F up to +131 °F)
- EU Declaration of Conformity: 50318
- ATEX Certificate: INERIS 18 ATEX 0042X
- IECEx Certificate: IECEx INE 18.0039X
- Certification Type: FELED (emergency)
— Gas: Zones 1 and 2
– Conforming to ATEX 2014/34/EU: II 2 G
– Type of Protection: Ex eb mb IIC Gb
– Temperature Class: T4
— Dust: Zones 21 and 22
– Conforming to ATEX 2014/34/EU: II 2 D
– Type of Protection: Ex tb IIIC Db
– Surface Temperature: +63 °C to +73 °C (+145 °F to +163 °F)
- Ambient Temperature: -20°C up to +50 °C (-4 °F up to 122 °F)
- EU Declaration of Conformity: 50318
- ATEX Certificate: INERIS 18 ATEX 0042X
- IECEx Certificate: IECEx INE 18.0039X
- Standard and Emergency:
— Index of Protection according EN/IEC 60529: IP66
— Impact Resistance (shock): IK10
— Photobiological Safety, IEC 62778 and IEC 62471: RG0 at 0.25m mounting height
Để biết rõ hơn hoặc cần tư vấn về thiết bị điện & phụ kiện chống cháy nổ hãng ATX/France, quý khách hàng vui lòng liên hệ theo thông tin dưới đây:
Địa chỉ: 18/21 Nguyễn Văn Dung, P.6, Q. Gò Vấp, TP. Hồ Chí Minh
Điện thoại: 02866572704 Website: https://makgil.com/ Email: info@makgil.com
