2323123
Danh mục sản phẩm

Single Stage Reducing Regulators- DR60 Series

Mã sản phẩm: DR60 Series
Nhà sản xuất: Drastar
Giá liên hệ
  • Vận chuyển: Phí vận chuyển tùy thuộc vào đơn hàng

Products Feature.

Single Stage Low Pressure Regulators(NPT 1/4″) 

DR60 Series is a 1/4” NPT type single-stage pressure reducing regulator being widely used for general plumbing and industrial gases. Mode of nickel plated brass for body and stainless steel or brass for internal parts, Teflon valve seat, and diaphragm of special rubber, DR60 series an economical model with durability and safety as well. 

◈ 1/4” NPT type regulator 
◈ Suitable for the general plumbing and industrial control fields 
◈ Inlet pressures are 3000psi(210bar) or 600psi(42bar) and outlet pressures are 25psig (1.7bar) 50psig(3.5bar), 100psig(7bar), 200psig(14bar) 
◈ Design proof pressure: 150% of maximum rated 

[DRASTAR Regulators are Oil-free] 
※ DRASTAR’s all pressure regulators are assembled, cleaned, inspected, and packed in clean-room equipped with clean bench, helium detector, particle counter, ultrasonic cleaner, ultrapure water system, vacuum packaging machine, etc. through oxygen cleaning procedure in compliance with process and regulations indicated in CGA 4.1. and or ASTM G-93 and are free of any grease or oils. 

※ Caution: Filtering (gas 7㎛ ~ 15㎛, water 15㎛ ~ 80㎛) is a MUST to use in the general gas application other than high purity gases. Otherwise, it may cause a failure to the regulators. It is strongly recommended to install filter for extension of life span and saving the maintenance expense

 

   Ordering Information.

DR60-A025-1
BASIC 
SERIES NUMBER
MAX. INLET 
PRESSURE
OUTLET 
PRESSURE RANGES
INLET 
OUTLET 
PORTS SIZE
DR60 SeriesA = 3000psi(210bar) 

B = 600psi(42bar)


025 = 1-25psig  (.1-1.7bar) 

050 = 1-50psig  (.1-3.5bar) 

100 = 1-100psig  (.1-7bar) 

200 = 1-200psig  (.2-14bar) 

1 = 3-Ports 

2 = 4-Ports

 

   Specification.

 Ports

  1/4" Female NPT 
  DR60-A100-1   3-Ports 
  DR60-A100-2   4-Ports 

 Design Proof Pressure

 150% maximun reted

 Leak Rate  Certification

  to 2 x 10-6 atm cc/sec Helium available.

 Body Materials

  Nickel Plated Forged Brass 

 Bonnet Material

  Zinc(Zn) Casting Nickel Plated 

 Diaphragm

  Particular of Synthetic Rubber

 Main Valve

  Stainless steel

 Valve Spring

  Stainless steel

 Valve Seat

  Teflon

 Inlet Pressure  Ranges

  DR60-A100-2   3000psi (210bar) 
  DR60-B100-2   600psi (42bar)

 Outlet Pressure  Ranges

  DR60-A025-2   25psi (1.7bar) 
  DR60-A050-2   50psi (3.4bar) 
  DR60-A100-2   100psi (7bar) 
  DR60-A200-2   200psi (14bar) 

 Operating  Temperature

  -40°C ~ +70°C (-40°F ~ +165°F)   Standard 

 Flow Capacity

  Cv = 0.2 Standard 

 Standard Optional

  Inlet CGA etc..

                          

     Recommendations


Each product is manufactured since being taken into consideration of the best safety and easy manipulation. However in order to use the regulator in most safe and effective way, you are recommended to use the actual pressure within the range of its 25% ~ 75%. For making precise, smooth movement and to prolong product life, strongly recommended to make a use within above mentioned range.

 


[ Unit conversion program ]

unitunit conversion
atmosphereatm
barbar
mbarmbar
kg_f/cm^2kg_f/cm^2
Pound per Squire InchPSI (= lb/in^2)
dyne per square centimeterdyne/cm^2
PascalPa
Newton per square meterN/m^2
Hecto PascalhPa
Kilo PascalkPa
Mega PascalMPa
수주(水柱)밀리미터mm H_2O (= mm Aq)
수주(水柱)인치in H_2O (= in Aq)
수은주(水銀柱)밀리미터mm Hg (= Torr)
수은주(水銀柱)인치in Hg

PDF Catalogue