2323123
Danh mục sản phẩm

Single Stage Reducing Pressure Regulators

Mã sản phẩm: 072 Series
Nhà sản xuất: DRASTAR
Giá liên hệ
  • Vận chuyển: Phí vận chuyển tùy thuộc vào đơn hàng

Products Feature

Single Stage Low Pressure Regulators(NPT 1/4”) 

072 Series is a 1/4” NPT type single-stage low pressure reducing regulator being most extensively used for gas cylinder and precision industry. 

With DRASTAR’s patented (patent #1086199) “ push and lock type handle ”, you can operate it easily and stably; “locking” by pushing down the handle will prevent any slight change of pre-set pressure value, which could possibly be caused by any vibration from gas pipeline or ambient applications and the other way “unlocking” by pulling it back enables you to adjust the pressure value freely again. 

◈ 1/4” NPT type regulator. 
◈ Inlet pressures are 3000psig (210bar) or 600psig (42bar) and outlet pressures are 25pisg (1.7bar), 50psig(3.5bar), 100psig(7bar), 250psig(17bar), 500psig (35bar) 
◈ Panel mounting nut or wall mounting bracket available as option. 
◈ W072S-0000x-1O: W model is only for Liquid or Water. 
◈ Design proof pressure: 150% of maximum rated. 
◈ Applicable for research labs, industrial gas control, gas cylinder, general gas line, bulk gas line, analytical application, ultra-pure gases, mixing gases, corrosive gases as well as liquid lines. 
◈ 2-ports, 3-ports, 4-ports and 5-ports, 6-ports available. 
 * Pressure Conversion 14.5 PSIG = 1 bar 145 PSIG = 1 MPa 

[DRASTAR Regulators are Oil-free] 
DRASTAR’s all pressure regulators are assembled, cleaned, inspected, and packed in clean-rooms equipped with clean bench, helium detector, particle counter, ultrasonic cleaner, ultrapure water system, vacuum packaging machine, etc. through oxygen cleaning procedure in compliance with process and regulations indicated in CGA 4.1. and or ASTM G-93 and are free of any grease or oils. 

※ Caution: Filtering (gas 7㎛ ~ 15㎛, water 15㎛ ~ 80㎛) is a MUST to use in the general gas application other than high purity gases. Otherwise, it may cause a failure to the regulators. It is strongly recommended to install filter for extension of life span and saving the maintenance expense.

     Ordering Information.

(W) 072S-0025L-1SH-5-V-H1
BASIS 
SERIES 
NUMBER
BODY 
MATERIAL
OUTLET 
PRESSURE 
RANGE
PORT 
TYPE
FLOW 
CAPACITY
DIAPHRAGM 
MATERIAL
INLET 
PRESSURE
SELF 
VENTING
HIGH 
TEMPE_ 
RATURE
Standard 
Inlet Pressure 
3000psig 
(210bar)
B = Brass 

S =  
Stainless 
Steel 316L


0025 = 25psi
      (1.7bar) 

0050 = 50psi
      (3.5bar) 

0100 = 100psi 
      (7bar) 

0250 = 250psi 
      (17bar) 

0500 = 500psi 
      (35bar) 

 

A = 2-Ports 

L = 3-Ports 

C = 4-Ports 

R = 3-Ports 

M = 4-Ports 

T = 4-Ports 

Y = 4-Ports 

X = 6-Ports 

 

1 = 1/4" 
NPT type 

1S = Cv0.06 
Standard 

1O = Cv0.2 
Optional
STS 316L Standard 

H =  
Hastelloy-C  

Optional
5 = Inlet 
600psi(42bar) 




Optional
V = Self- 
    Venting 




Optional
H1 =120°C 

H2 =250°C 

H3 =350°C 

Optional

※ Note: 1) (W) model is only for liquid and water.  

             2) H1, H2, H3 option is not available for brass products.  

 Specification

 Ports

 1/4"  Female NPT 
 072x-0000L-1x   3-Ports 
 072x-0000C-1x   4-Ports 
 072x-0000X-1x   6-Ports

 Design Proof Pressure

 150% maximun rated

 Leak Rate  Certification

 to 2 x 10 -8 atm cc/sec Helium available.

 Body Materials

 072S-0100x-1S   Stainless steel 316L 
 072B-0100x-1S   Nickel Plated Brass

 Bonnet Material

 Nickel Plated Brass (Stainless steel 316L Optional)

 Diaphragm

 072S-0100x-1S   Stainless steel 316L 
 072S-0100x-1SH   Hastelloy-C Optional

 Main Valve

 Stainless steel 316L

 Valve Spring

 Stainless steel 316L

 Valve Seat

 Teflon (Kel-F, Polyimide, etc.. Optional) 
 072S-0000x-P1S (PCTFE Optional)

 Inlet Pressure  Ranges

 072S-0000x-1S   3000psi (210bar) 
 072S-0000x-1S-5   600psi (42bar)

 Outlet Pressure  Ranges

 072x-0025x-1S   25psi (1.7bar) 
 072x-0050x-1S   50psi (3.4bar) 
 072x-0100x-1S   100psi (7bar) 
 072x-0250x-1S   250psi (17bar 
 072x-0500x-1S   500psi (35bar))

 Operating  Temperature

 -40°C ~ +70°C (-40°F ~ +165°F)   Standard 
 072x-0000x-xx-H1   +120°C   Optional 
 072x-0000x-xx-H2   +250°C   Optional

 072x-0000x-xx-H3   +350°C   Optional 
 +400°C ~ +540°C (+750°F ~ +1000°F)   Optional

 Flow Capacity

 072x-0000x-1S   Cv=0.06 Standard 
 072x-0000x-1O   Cv=0.2 Optional

 Standard Optional

 Inlet CGA, Inlet Outlet Gauge etc..

                                      

   Recommendations


Each product is manufactured into consideration of the best safety and easy manipulation. However in order to use the regulator in most safe, effective, precise and smooth way and prolong its life time, you are recommended to use the actual pressure within the range of 25% ~ 75% of its rated pressure.

 


[ Unit conversion program ]

unitunit conversion
atmosphereatm
barbar
mbarmbar
kg_f/cm^2kg_f/cm^2
Pound per Squire InchPSI (= lb/in^2)
dyne per square centimeterdyne/cm^2
PascalPa
Newton per square meterN/m^2
Hecto PascalhPa
Kilo PascalkPa
Mega PascalMPa
수주(水柱)밀리미터mm H_2O (= mm Aq)
수주(水柱)인치in H_2O (= in Aq)
수은주(水銀柱)밀리미터mm Hg (= Torr)
수은주(水銀柱)인치in Hg

PDF Catalogue