2323123
Danh mục sản phẩm

Diaphragm pressure gauge with output signal Models PGT43.100, PGT43.160

Mã sản phẩm: Models PGT43.100, PGT43.160
Nhà sản xuất: WIKA - Đức
Giá liên hệ
  • Vận chuyển: Phí vận chuyển tùy thuộc vào đơn hàng

Diaphragm pressure gauge with output signal

For the process industry, high overload safety up to the 10-fold full scale value, max. 40 bar

Applications

  • Acquisition and display of process values
  • Output signals 4 ... 20 mA, 0 ... 20 mA, 0 ... 10 V for the transmission of process values to the control room
  • For measuring points with increased overload
  • Easy-to-read, analogue on-site display needing no external power
  • Safety-related applications

Special Features

  • No configuration necessary due to “plug-and-play”
  • Signal transmission per NAMUR
  • Measuring ranges from 0 ... 16 mbar
  • Easy-to-read analogue display with nominal size 100 or 160
  • Safety pressure gauge S3 per EN 837-3

Description

Wherever the process pressure has to be indicated locally and, at the same time, a signal transmission to the central control or remote centre is desired, the model PGT43 intelliGAUGE (US patent no. 8,030,990) can be used.

Through the combination of a high-quality mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the voltage supply is lost.
The intelliGAUGE model PGT43 fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the working pressure of pressure vessels. An additional measuring point for mechanical pressure display can thus be saved.

The model PGT43 is based upon a model 43x.30 high-quality, stainless steel safety pressure gauge with a nominal size of 100 or 160. The pressure measuring instrument is manufactured in accordance with EN 837-3

The robust diaphragm measuring system produces a pointer rotation proportional to the pressure.
An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 ... 20 mA, is produced.

The electronic WIKA sensor, integrated into the high-quality pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.

The measuring span (electrical output signal) is adjusted automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually.

Download datasheet.