Block-and-bleed valve Models IV20, IV21 – MAKGIL - HỆ THỐNG CUNG CẤP VẬT TƯ CÔNG NGHIỆP SỐ 1 VIỆT NAM
Danh mục sản phẩm

Block-and-bleed valve Models IV20, IV21

Mã sản phẩm: Models IV20, IV21
Nhà sản xuất: WIKA - Đức
Giá liên hệ
  • Vận chuyển: Phí vận chuyển tùy thuộc vào đơn hàng

2-valve manifold

Applications of the block-and-bleed valve

  • Shut off and vent pressure measuring instruments
  • For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive environments
  • Process industry: Oil & gas, petrochemical, chemical industries, power generation, water and wastewater

Special features of the block-and-bleed valve

  • Low-wear design due to non-rotating spindle tip in the bonnet
  • Low torque and smooth operation of valve handle even at high pressure
  • Enhanced safety due to blow-out proof bonnet design
  • Valve seat tested for leak tightness per BS6755 / ISO 5208 leak rate A
  • Customer-specific combination of valves and instruments (hook-up) on request

Description of the block-and-bleed valve

With 2-valve manifolds, the block-and-bleed version is standard. The shut-off valve of the separates the process from measuring instruments such as pressure gauges, switches or transmitters. By closing this valve the instrument can be safely dismounted for services like recalibration or replacement. The vent valve allows the safe venting of the instrument, prior to the dismounting or for zero point check.

Through the non-rotating spindle tip of the block-and-bleed valve, the wear of the sealing elements is reduced. This results, particularly with frequent opening and closing, in a noticeable increase in the service life.

Through the blow-out proof design of the block-and-bleed valve, working safety is improved, especially in applications with high pressure loading.

As an option, WIKA offers the professional assembly of valves and pressure measuring instruments and also other accessories into a ready-to-install solution, also known as a hook-up. To ensure the performance of the complete system, an additional leak test is carried out on the hook-up.

Technical information

Specifications according to data sheetAC 09.19
Werkstoff Köper:Stainless steel 316L/1.4404
Werkstoff Köper:(Sonderwerkstoff sowie Monel, Hastelloy auf Anfrage)
max. +200°C with PTFE packing material
max. +500°C with graphite packing material

Standard features

Material bodystainless steel 316L
Nominal pressure6000 psi / 420 bar
Material packingPTFE
Certificates accessoryNACE Sour Gas Service and Inspection certificate 3.1 according to EN 10204,body material

Download data sheet.